Connecting to Quidel - Wired Ethernet (LAN)
The data connection to the Sofia 2 is via the RJ45 connector located on the back side of the Sofia 2. Use a standard Ethernet cable to connect the Sofia 2 to wired ethernet.
Select Wired Ethernet then press .
For Set IP Address, select Manual or DHCP.
If DHCP is selected, select to test the connection and complete the network setup.
If Manual is selected, press to continue to the next screen. Using the on-screen keypad, enter information for IP Address, Subnet Mask, and Gateway, then press . On the next screen, enter information for Primary and Secondary DNS. Press to test the connection and complete the network setup.
Once the test connection is successful the following message will be displayed